Tractor reference
LS Tractor MT225S
Specifications, maintenance, parts and compatibility reference.
Specification set: United States - ROPS; HST; 3 ranges Current LS Tractor USA MT225S. Current 2025/10 brochure is primary normalized specification source; live model page confirms the same tractor configuration.
Machine Configuration
Operator stationROPS
Engine
Engine model3TNV80F-ZXKLST (Yanmar)
Engine type3-cylinder indirect-injection diesel
Emissions standardTier 4
Engine displacement1.3 L
Gross engine power24.7 hp
Rated engine speed2800 rpm
Transmission
TransmissionHST
Transmission speeds / ranges3 ranges
BrakesWet, multi-disc
SteeringHydrostatic power steering
PTO
PTO power19.3 hp
PTO typeIndependent
Rear PTO540 rpm standard
Mid PTO2,500 rpm optional
Hydraulics
Hydraulic control systemPosition
Implement hydraulic pump capacity5.6 gpm
Power-steering pump capacity3.7 gpm
Total hydraulic flow9.3 gpm
3-point hitch categoryCategory I
3-point hitch lift capacity1896 lb
Remote valves1 pair optional
Dimensions & Weight
Overall length with 3-point hitch111.9 in
Overall width48.7 in
Published overall/ROPS/cab height86.4 in
Wheelbase63.4 in
Published configuration weight1764 lb
Capacities
Fuel tank capacity6.8 US gal (25.7 L)
Verified attachment fitment
Attachment fitment is stored separately from service parts. A listed attachment may still require a specific axle, driveline, transmission or tractor configuration; verify the requirement below before ordering or installing.
Backhoe · Conditional fitmentLS Tractor LB1300Requirement: LB1300 is the only MT225S backhoe fitment confirmed simultaneously by the current MT225S model page and current central LS Tractor backhoe catalog; conflicting LB2001/LB2100 references are intentionally deferred.Backhoe details: Current LS Tractor USA MT225S backhoe. Both current sources publish 84.9 in digging depth, 113.7 in reach from swing pivot, 64.7 in loading height, 73.4 in transport height, 177° bucket rotation and 3,013 lb bucket digging force. The current 2025/10 MT2S brochure publishes 180° swing arc, 82.2 in stabilizer spread down and 65.4 in up; the current central backhoe catalog publishes 170° swing arc, 57.3 in down and 65.5 in up. These official differences are retained rather than averaged.
Front loaderLS Tractor LL2001Fitment note: LL2001 is confirmed for MT225S by the current MT225S page, current MT2S brochure and current central front-loader catalog.Front loader details: Current LS Tractor USA MT225S alternate front loader. 54 in bucket; 84.4 in maximum lift height; 59.1 in clearance with attachment dumped; 17.8 in reach at maximum height; 55° maximum dump; 27° maximum rollback; 4.5 in digging depth; 49.5 in carry height; current MT2S brochure publishes 1,744 lb breakout force at pivot pin and approximately 742 lb without bucket. Current central loader catalog publishes a different lift-capacity label/value, retained separately.
1,127 lb at pivot pin (current MT2S brochure); 1,067 lb at pivot pin / maximum height (current central loader catalog)Lift height: 84.4 in maximum lift height
Front loaderLS Tractor LL2300Fitment note: LL2300 is confirmed for MT225S by the current MT225S page, current MT2S brochure and current central front-loader catalog.Front loader details: Current LS Tractor USA MT225S front loader. 54.3 in bucket; 84.4 in maximum lift height; 59.1 in clearance with attachment dumped; 17.9 in reach at maximum height; 55° maximum dump; 40° maximum rollback; 4.5 in digging depth; 46 in carry height; 2,290 lb breakout force at pivot pin; approximately 708 lb without bucket.
1,067 lb at pivot pin (current MT2S brochure); central loader catalog also publishes 1,067 lb at pivot pin / maximum heightLift height: 84.4 in maximum lift height
Sources
LS Tractor · official sourceLS Tractor current MT2S brochure
LS Tractor · official sourceLS Tractor MT225S conservative current backhoe fitment
LS Tractor · official sourceLS Tractor MT225S current loader specifications and fitment