Tractor reference
Kubota L3302
Specifications, maintenance, parts and compatibility reference.
Specification set: United States - L3302DT 4WD gear-drive transmission Current Kubota USA L02 specification sheet. Gear and HST values are kept as separate current versions.
Engine
Engine manufacturerKubota
Engine typeDirect injection, vertical, water-cooled 4-cycle diesel
Cylinders3
Bore × stroke3.4 × 4.0 in (87 × 102.4 mm)
Displacement111.4 cu in
Displacement1826 cm3
Gross engine power33 hp
Net engine power31.8 hp
Rated engine speed2700 rpm
Transmission
TransmissionGear shift with synchronized shuttle, 8 forward / 8 reverse
Driveline4WD
PTO
PTO power28 hp
Rear PTO540 rpm at 2430 engine rpm
Hydraulics
Main hydraulic pump capacity6.8 gpm
Power-steering pump capacity4.1 gpm
Hydraulic lift controlPosition control
3-point hitch categorySAE Category I
3-point lift capacity at lift points1985 lb
3-point lift capacity at 24 in. behind lift point1433 lb
Hydraulic system pressure165 kgf/cm² (16.2 MPa)
Dimensions & Weight
Overall length without 3-point108.7 in
Overall width at minimum tread55.1 in
Overall height with foldable ROPS91.7 in
Wheelbase63.4 in
Minimum ground clearance13.4 in
Minimum turning radius with brake, 4WD disengaged8.2 ft
Tractor weight with ROPS2833 lb
Capacities
Fuel tank capacity11.1 US gal (42 L)
Steering & Brakes
SteeringIntegral type power steering
Brake typeMechanical wet disc
Electrical
Battery12 V, reserve capacity 110 min, CCA 580 A
Alternator12 V, 45 A
Compatible parts & kits
This source-backed list can include maintenance parts, mounting hardware and accessory kits. Serial-number and machine-configuration restrictions may still apply, so review each part page before ordering or installing.
Compatible loaders
Loader compatibility is stored separately from parts. Configuration requirements below come from the cited John Deere compatibility table.
Front loaderJohn Deere LA526Kubota USA current Standard L Series page identifies LA526 as the performance-matched Kubota-built front loader for L3302/L3902; current listed capacity is 1144 lb at the pivot pin/max height and 1506 lb at the pivot pin at 1.5 m.Loader configuration: Kubota-built LA526; current Standard L page identifies L2502, L3302 and L3902 as matching tractors. Two loader packages are available, including a 2-lever quick-coupler option.
L2502: 1096 lb at pivot pin/max height, 1446 lb at pivot pin @ 1.5 m; L3302/L3902: 1144 lb at pivot pin/max height, 1506 lb at pivot pin @ 1.5 mLift height: Current Kubota product page: maximum lift height at pivot pin 94.2 in